Crosshatch Cutter Set (rotable) according to DIN EN ISO 2409
Description:
The Crosshatch Cutter is designed and manufactured according to the standards DIN EN ISO 2409, GB / T 9286, BS 3900 E6 and ASTM D3359.
The rotable function enables even pressure on all blades during use, which leads to a higher reproducibilty and also is more user friendly.
Technical specifications:
Gap (mm): 1
Blades: 11
Squares after cross cut: 100
Cutting Edges: 1
Coating Thickness (µm): 0~60
Item number: PG-2206/2C
1
Delivery Scope: Crosshatch Cutter (rotable), Magnifier, Brush, Tesa Adhesive Tape 4657 (50m x 25mm)
Including manufacturer’s test certificate and 1 year warranty
Construction of the device:
This cross cutter (also called cross hatch tester or crosshatch cutter) consists of a handle with a cutting tool. The cutting tool has one cutting edge, once it becomes blunt, it can be changed to a new cutting tool (cutting head). The cutting edge is made up of 11 blades.
We suggest changing the cutting edge after about 700 cuts by replacing the cutting tool with a new one.
The distances between the blades are either 1.0 mm, 1.5 mm, 2.0 mm or 3.0 mm.
General:
The standard DIN EN ISO 2409 (cross-cut test) specifies the following:
The spacing of the cuts in each direction shall be equal and shall depend on the thickness of the coating and on the type of substrate as follow:
up to 60 µm:
1 mm spacing, for hard (e.g metal and plastics) substrates;
up to 60 µm:
2 mm spacing, for soft (e.g wood and plaster) substrates;
61 µm to 120 µm:
2 mm spacing, for both hard and soft substrates;
121 µm to 250 µm:
3 mm spacing, for both hard and soft substrates;
The cross-cut test is not suitable for coatings of total thicknesses greater then 250 µm
Crosshatch Cutter rotable head
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren