Quadruplex Sagging Applicator
Description:
The quadruplex sagging applicator applies 5 parallel wet films with different thicknesses – from 100 to 500 µm (in 100 µm steps) at once. Thus you can see the sagging characteristics of the wet film and determine the sagging limit.
For this the paint needs to be applied with the Quadruplex Sagging Applicator by hand or with an automatic film applicator on a flat substrate. Afterwards the substrate with the 5 films has to be hanged up vertically for drying. The latest film where no sagging is noted, is set as sagging limit. From here, if more wet film thickness is applied, the film will start sagging.
Technical specifications:
– Made of high grade stainless steel
– One application = five films with different wet film thickness: from 100 to 500 µm (in 100 µm steps)
– Total length: 130 mm
– Film width of each film: 20 mm
– Space between films: 3 mm
Order-Number: PG-034-2
Range (µm): 600/700/800/900/1000
Standards: ASTM D4400, D373
Including Manufacturer’s Test Certificate
Other sizes available on request.