Sagging Applicator
Description:
The sagging applicator applies ten parallel wet films with different thicknesses – from 450 to 675 µm (in 25 µm steps) at once. Thus you can see the sagging characteristics of the wet film and determine the sagging limit.
For this the paint needs to be applied with the sagging applicator by hand or with an automatic film applicator on a flat substrate. Afterwards the substrate with the ten films has to be hung vertically for drying. The latest film, where no sagging is noted, is set as sagging limit. From here, if more wet film thickness is applied, the film will start sagging.
Technical specifications:
– Made of high grade stainless steel
– One application = ten films with different wet film thickness: from 450 to 675 µm (in 25 µm steps)
– Film width of each film: 6 mm
– Spacing: 1.5 mm
Item number: PG-1809/3
Gap heights (µm): 450/475/500/525/550/575/600/625/650/675
Standards: ASTM D2801
Including manufacturer’s test certificate and 1 year warranty
Other sizes available on request.