5,799.00 €
Description:
The automatic film applicator with vacuum bed is made for an easy and reproducible film application. In contrast to manual application the application speed can be set accurately and is always constant. Manual application causes variations between different users.
This machine has a vacuum bed which is used to fixate the substrate to be coated (for example: plastic panels, test chart, plastic film, etc.) without clamp. This allows you to apply the whole surface area of your substrate. No coating should leak through the vacuum holes.
The application is done automatically with a bar coater or with a film applicator (single, double, four sided, adjustable film applicator, etc.). A bar coater is not necessarily needed.
Application with bar coater: For any wet film thickness you will need an individual bar coater*. It applies on the whole surface area. The bar coater has to have a diameter between 10 – 13 mm and a length of 320 mm.
Application with a film applicator: The wet film thickness depends on the used film applicator and the film width depends on the film applicators length.
The following options can be adjusted on the English display:
Film size: DIN A4 (250 mm), DIN A3 (350 mm) or customizable from 0 to a maximum of 360 mm, adjustable in 1 mm steps.
Application speed: From 50 mm/s to 300 mm/s, adjustable in 1 mm/s steps. Optionally also from 10 mm/s to 140 mm/s, adjustable in 1 mm/s steps.
Back speed: From 50 mm/s to 200 mm/s, adjustable in 1 mm/s steps.
You can set and save 6 different settings. Every setting can be assigned with a name and you can indicate a value for viscosity and film thickness as additional information.
Technical specifications:
Item number: PG-1811/2
Speed: 50-300 mm/s, optionally 10-140 mm/s
Stroke Length (max): 360 mm
Test Panel: 420 x 300 mm
Test Platform: Vacuum bed
Supply Voltage: 230 V ± 10 %, 50/60 Hz
*Bar Coater available in: 6, 8, 10, 12, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120 or 200 µm.
Diameter: 10 mm. (For the usage of our automatic film applicator, the bar coaters diameter has to be in between 10 – 13 mm)
Length: 320 mm.
Standards: ASTM D823/C
Including Manufacturer’s Test Certificate and 1 year warranty